Table of Contents
8.3.13
Paper feeding system related service call
[C130] 1st drawer tray abnormality
[C140] 2nd drawer tray abnormality
Classification
Paper feeding system related service
call
Check item
Coupling
Tray-up motor
Tray-up sensor
PFC board
Replace parts
Tray-up motor
Tray-up sensor
PFC board
[C150] 3rd drawer tray abnormality
[C160] 4th drawer tray abnormality
Classification
Paper feeding system related service
call
Check item
Coupling
Tray-up motor
Tray-up sensor
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
The tray-up motor is not rotating or the 1st drawer tray is not
moving normally. (the case that paper can be fed from any
drawer except the 1st drawer).(C130)
The tray-up motor is not rotating or the 2nd drawer tray is not
moving normally. (the case that paper can be fed from any
drawer except the 2nd drawer).(C140)
Check that no paper scraps remain in the coupling section.
•
Motor check
(Perform the output check: 03-246/247)
•
Connector check
•
Harness check
•
Sensor check
(Perform the input check: 03-[COPY]ON/[9]/[H], /[9]/[G])
•
Connector check
•
Harness check
•
Connector check (CN508, CN513)
•
Board check
The 3rd drawer tray-up motor is not rotating or the 3rd drawer
tray is not moving normally. (the case that paper can be fed
from any drawer except the 3rd drawer).(C150)
The 4th drawer tray-up motor is not rotating or the 4th drawer
tray is not moving normally. (the case that paper can be fed
from any drawer except the 4th drawer).(C160)
Check that no paper scraps remain in the coupling section.
•
Motor check
(Perform the output check: 03-248/249)
•
Connector check
•
Harness check
•
Sensor check
(Perform the input check: 03-[COPY]ON/[9]/[F], /[9]/[E])
•
Connector check
•
Harness check
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
8 - 112
Error item
Measures
Remarks
Error item
Measures
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
