Table of Contents
4.11.36 RADF opening/closing sensor (SR15)
(1)
Take off the RADF rear cover.
P. 4-301"4.11.54 RADF board bracket"
(2)
Open the RADF and disconnect 1 connector.
(3)
Release 2 latches and take off the RADF
opening/closing sensor.
4.11.37 Original empty sensor (SR3)
(1)
Open the original jam access cover.
(2)
Remove 4 screws and take off the sensor
bracket.
(3)
Disconnect 1 connector. Release 2 latches
and take off the original empty sensor.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-848
Fig. 4-849
Original empty sensor
Fig. 4-850
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 291
DISASSEMBLY and REPLACEMENT
4
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
