Table of Contents
(8)
Take off the developer sleeve.
Notes:
When installing, adjust the gap between the
developer sleeve and the doctor blade.
4.6.27
Doctor blade
(1)
Take off the blade cover.
P. 4-114"4.6.26 Developer sleeve"
(2)
Remove 2 screws and then take off the
doctor blade.
4.6.28
Auto-toner sensor-K/C/M/Y (S26/S27/S28/S29)
(1)
Take off the corresponding process unit
(EPU) in which the auto-toner sensor is
installed, and then take off the developer unit
to remove the developer material out of the
unit.
P. 4-110"4.6.24 Developer unit"
P. 4-112"4.6.25 Developer material"
(2)
Disconnect 1 connector, remove 1 screw,
and then take off the auto-toner sensor.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 116
Developer sleeve
Fig. 4-340
Doctor blade
Fig. 4-341
Auto-toner sensor
Fig. 4-342
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
