Table of Contents
(7)
Remove 2 screws and take off the exit motor
from the motor bracket.
4.10.5
Upper paper exit sensor (S61) / Upper exit tray paper full
detection sensor (S62)
(1)
Take off the upper exit section fan unit.
P. 4-206"4.10.1 Upper exit section cooling
fan-1(F32) / Upper exit section cooling fan-2
(F33)"
(2)
Take off the exit motor.
P. 4-207"4.10.4 Exit motor (M2)"
(3)
Remove 4 screws to take off the upper exit
cover.
(4)
Remove 2 screws and then take off the
upper paper exit roller unit.
(5)
Disconnect 1 connector and then release a
harness from a clamp.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 208
Exit motor
Fig. 4-602
Upper exit cover
Fig. 4-603
Upper paper exit roller unit
Fig. 4-604
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
