Table of Contents
(8)
Take off the fuser belt thermostat [1] by
removing 2 screws each.
Notes:
•
Do not touch the temperature detection
section of the fuser belt thermostat [1].
•
When replacing or taking off the fuser belt
thermostat [1], check the gap between
the fuser belt and its thermostat [1]. P.
6-96"6.11.1 Gap adjustment for fuser belt
thermostats"
•
When assembling, fix the fuser belt
thermostat cable securely with a clamp
[1] so that it does not contact with the
fuser belt.
4.9.12
Fuser belt edge thermistor (THM6)
(1)
Take off the transport guide-1.
P. 4-174"4.9.3 Transport guide-1"
(2)
Take off the transport guide-2.
P. 4-174"4.9.4 Transport guide-2"
(3)
Take off the rear plate.
P. 4-176"4.9.7 Separation plate"
(4)
Remove 1 screw and take off the bracket of
the fuser belt edge thermistor.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
[ 1 ]
Bracket
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 190
[ 1 ]
Fig. 4-549
Fig. 4-550
Fig. 4-551
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
