4.6.32
K drum phase sensor (S44)
(1)
Take off the rear cover.
P. 4-7"4.1.18 Rear cover"
(2)
Release 4 re-use band [1] and take off the
harness guide [2].
(3)
Disconnect 1 connector and remove 2
screws. Then take off the bracket.
(4)
Release 3 latches. Then take off the K drum
phase sensor.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-349
Fig. 4-350
K drum phase sensor
Fig. 4-351
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 119
[ 1 ]
[ 2 ]
Bracket
DISASSEMBLY and REPLACEMENT
4