Table of Contents
4.10.22 Bridge unit exit roller-2
(1)
Take off the bridge unit.
P. 4-213"4.10.11 Bridge unit"
(2)
Take off the bridge unit front cover.
P. 4-214"4.10.12 Bridge unit front cover"
(3)
Remove 1 screw and take off transport
guide-4 by sliding it toward you.
(4)
Remove 2 E-rings, 1 gear and 2 bearings.
Then take off bridge unit exit roller-2.
4.10.23 Transport path switching solenoid-1 (SOL1)
(1)
Take off the bridge unit front cover.
P. 4-214"4.10.12 Bridge unit front cover"
(2)
Remove 1 spring.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Transport guide-4
Fig. 4-658
Bearing
Bridge unit exit roller-2
Bearing
Fig. 4-659
Spring
Fig. 4-660
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 227
DISASSEMBLY and REPLACEMENT
4
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
