Table of Contents
Check item
Hole punch control PC board (HP)
Replace parts
Sideways adjustment motor
Sideways deviation home position
sensor
Hole punch control PC board
[CC52] Skew adjustment motor (M1) abnormality
Classification
Finisher related service call
Check item
Skew adjustment motor (M1)
Skew home position sensor (S2)
Hole punch control PC board (HP)
Replace parts
Skew adjustment motor
Skew home position sensor
Hole punch control PC board
[CC60] Punch motor abnormality
Classification
Finisher related service call
Check item
Punch home position sensor (PI63)
Punch motor clock sensor (PI62)
Punch motor (M3)
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
•
Connector check
•
Board check
Skew adjustment motor is not rotating or puncher is not
shifting normally. [MJ-6102]
The [CC52] error will be displays when the [ED10] error
occurs three times in succession or during the initial
operation.
•
Motor check
•
Connector check
•
Harness check
•
Sensor check
•
Connector check
•
Harness check
•
Connector check
•
Board check
Punch motor is not rotating or puncher is not shifting normally.
[MJ-6102]
•
Sensor check
•
Connector check
•
Harness check
•
Sensor check
•
Connector check
•
Harness check
•
Motor check
•
Connector check
•
Harness check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 153
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures
ERROR CODE and TROUBLESHOOTING
8
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
