Table of Contents
4.3.2
Lens cover
(1)
Take off the original glass.
P. 4-15"4.3.1 Original glass"
(2)
Release 1 clamp and disconnect 1
connector.
(3)
Remove 5 screws and take off the lens
cover.
4.3.3
SLG board cooling fan (F1)
(1)
Take off the lens cover.
P. 4-16"4.3.2 Lens cover"
(2)
Remove 2 screws and disconnect 1
connector.
(3)
Take off the SLG board cooling fan.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 16
Clamp
Fig. 4-42
Lens cover
Fig. 4-43
SLG board cooling fan
Fig. 4-44
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
