Kenwood NEXEDGE NX-200 Function Reference page 532
Hide thumbs
Also See for NEXEDGE NX-200:
- Service manual (172 pages) ,
- Instruction manual (136 pages) ,
- Brochure (12 pages)
Table of Contents
24
TRANSCEIVER DATA PROTECTION WITH PASSWORD
The transceiver has password functions for protecting the transceiver operation and the security of the configuration data.
24.1
Password for Transceiver Operation (Transceiver Password)
Transceiver Password protects the transceiver from unauthorized usage.
Placing the transceiver in Transceiver Password Mode prevents the transceiver from being used. The transceiver exits
Transceiver Password Mode and becomes used if a password is entered and the password is correct.
Pressing the Transceiver Password key places the transceiver in Transceiver Password Mode.
Or, pressing the Menu key places the transceiver in Menu Mode, and then selecting "Transceiver Password" places the
transceiver in Transceiver Password Mode. (Refer to
A password can be configured for the transceiver using KPG-111D/ DN. The password can be configured using any
numbers between 0 and 999999 inclusive.
Note
• If Transceiver Password is configured but no Transceiver Password is configured for the Transceiver Password and Menu key, the
transceiver automatically enters Transceiver Password Mode when the transceiver is turned ON.
• This function is unavailable for NX-200S/ NX-300S.
Operating the Transceiver
Placing the transceiver in Transceiver Password Mode
1
Press the
Transceiver Password
The transceiver enters Transceiver Password Mode.
Exiting the Transceiver Password Mode
1
Enter a password in Transceiver Password Mode.
Refer to
Entering or Deleting a Code on page 48
methods.
FUNC (K)/Ver 4.00
3.4 Using Menu Mode on page
key.
for entry
23.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS
INDEX
498
Chapters
Table of Contents
