Kenwood NEXEDGE NX-200 Function Reference page 485
Hide thumbs
Also See for NEXEDGE NX-200:
- Service manual (172 pages) ,
- Instruction manual (136 pages) ,
- Brochure (12 pages)
Table of Contents
19 SCAN
19.8 Common Functions for Scan
Operating the Transceiver
NX-200S/ NX-300S
1
Press the
Scan Delete/Add
If the selected channel or GID is configured to be scanned, the channel or GID is deleted from the target channels or GIDs for
scanning.
If the selected channel or GID is not configured to be scanned, a Key-entry Error Tone sounds from the transceiver and the
transceiver does not respond at all.
Other than NX-200S/ NX-300S
1
Press the
Scan Delete/Add
If the selected channel or GID is configured to be scanned, the channel or GID is deleted from the target channels or GIDs for
scanning. The "
" icon (right) disappears.
If the selected channel or GID is not configured to be scanned, the channel or GID is added to the target channels or GIDs for
scanning. The "
" icon (right) appears.
If "Scan Delete/Add" is selected after entering Menu Mode by pressing the Menu key, "DELETE" or "ADD" must be selected.
(Refer to
3.4 Using Menu Mode on page
Note
Pressing the Scan Delete/Add key while the scan temporarily pauses causes the status of Delete or Add to be retained in the
transceiver.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Adding or Deleting a Zone to or from the Target Zones for Scanning
(Zone Delete/Add)
Zone Delete/Add is the function to add a zone to the target zones for scanning or delete a zone from the target zones for
scanning.
With this function, a user can reliably receive a call from a primary zone by deleting unnecessary zones to increase the
scan speed.
Pressing the Zone Delete/Add key adds or deletes a zone to or from the target zones for scanning.
Or, a zone can be added to or deleted from the target zones for scanning by selecting "Zone Delete/Add" after entering
Menu Mode by pressing the Menu key. (Refer to
Operating the Transceiver
NX-200S/ NX-300S
1
Press the
Zone Delete/Add
If the selected zone is configured to be scanned, the zone is deleted from the target zones for scanning.
If the selected zone is not configured to be scanned, the zone is added to the target zones for scanning.
FUNC (K)/Ver 4.00
key.
key.
23.)
See
FPRG 8.12 Key Assignment Window)
3.4 Using Menu Mode on page
key.
23.)
CONTENTS
INDEX
451
Chapters
Table of Contents
