Kenwood NEXEDGE NX-200 Function Reference page 238
Hide thumbs
Also See for NEXEDGE NX-200:
- Service manual (172 pages) ,
- Instruction manual (136 pages) ,
- Brochure (12 pages)
Table of Contents
9 NXDN TRUNKING SYSTEM
9.5 Making an Individual Call (Transmission Trunked)
Transition for Each Mode
If a user wishes to send or receive an Individual Call, Group Call, Status Message, or Short Message, the user must
operate the transceiver after selecting the desired mode. Refer to
each mode.
9.5
Making an Individual Call (Transmission Trunked)
Individual Call can be used to initiate a call to a target transceiver individually to establish voice calls.
By specifying a Unit ID, the transceiver can initiate a call to the transceiver having the Unit ID.
"Transmission Trunked" needs to be configured for Trunking Type on both the transmitting transceiver and the receiving
transceiver to initiate an Individual Call in an NXDN Trunking system. "Transmission Trunked" or "Message Trunked" also
needs to be configured for Trunking Type on the system. (Refer to
Initiating an Individual Call (Transmission Trunked)
An Individual Call can be started by one of the following methods.
Individual Call Mode
In Individual Call Mode, an Individual Call is initiated by selecting a Unit ID configured in the Unit ID List or directly
entering a Unit ID. (Refer to
Pressing the Individual (NXDN), Individual + Status (NXDN), or Individual + SDM (NXDN) key places the
transceiver in Individual Call Mode.
Or, the transceiver also enters Individual Call Mode by a user selecting "Individual (NXDN)", "Individual + Status
(NXDN)", or "Individual + SDM (NXDN)" after the transceiver enters Menu Mode by a user pressing the Menu key.
(Refer to
3.4 Using Menu Mode on page
Or, pressing the [0] to [9] keys on the keypad causes the transceiver to enter Individual Call Mode if "Individual
(NXDN)", "Individual + Status (NXDN)" or "Individual + SDM (NXDN)" is configured for Keypad Operation. The
transceiver enters Unit ID Shortcut Entry Mode or will be on hold as the first digit of the Unit ID is entered. (Refer to
Keypad Operation on page
Selcall on PTT
The transceiver starts an Individual Call when the PTT switch is pressed on a GID where "Individual Call" is configured
for Selcall on PTT. The Unit ID of the target transceiver can be configured by selecting one Unit ID from the Unit ID List
by using KPG-111D/ DN.
The Unit ID Name or Unit ID of the transmitting transceiver appears on the receiving transceiver display. The receiving
transceiver can respond to the caller by pressing the PTT switch while the caller's ID appears.
The transceiver can record the reception of the Individual Call in the transaction log. The record can be viewed in Stack
Mode and the transceiver can initiate an Individual Call to the target transceiver. (Refer to
(Stack) on page
38.)
Note
For NX-200S/ NX-300S, the transceiver cannot start an Individual Call by using Individual Call Mode. Also, for NX-200S/ NX-300S, a
transceiver cannot start an Individual Call by using Selcall on PTT, but the transceiver can respond to the received Unit ID.
FUNC (K)/Ver 4.00
Unit ID List on page
211.)
23.)
21.)
Transition for Each Mode on page 124
Trunking Type on page
203.)
3.7 Viewing the Receive History
CONTENTS
for transition for
INDEX
204
Chapters
Table of Contents
