Table of Contents
Model IFP-2000/ECS Installation Manual
When in the record mode, the ECS-VCM keys will function as follows:
Select Keys
1-15
While in the Local Record mode, Select Keys 1-15 will be used to reference message slots 1-15. The associated
green Select Key LED will indicate that a message is currently programmed in the corresponding slot. When
there is no message recorded (or the message is erased), the associated green Select Key LED will be off. While
recording a particular message, the associated red Select Key LED will turn on until recording is completed. The
Select Key 1-15 will be used to playback a recorded message or to select the message slot to record to or erase.
When in the Local Record mode, the ECS-VCM LEDs will function as follows:
LED
Select Key 1-15 Green LED
Select Key 1-15 Red LED
Select Key 1-15 Green/Red LED
Select Key 1-15 Red LED
11.8.1
Recording Messages 1-15 Using Aux Audio Input
Recording messages from the Aux Audio Input enables you to load customized, pre-recorded messages into an
ECS message location.
11-11
ECS Message Key 1
ECS Message Key 3
ECS Message Key 8
Select Keys 1-15
Table 11-1: LED Functions During Programming
LED State
On
On
Off/Off
Flashing
Key
Select message slot to record to.
Start and stop recording from Aux.
Audio Input
Erase user message 1-15
Message slot 1-15
Meaning
Message is currently programmed in this slot
Message recording is in progress
Message slot is empty
Message is being played back or message is selected
for recording
151430-L8
ECS Message Key 1
ECS Message Key 3
ECS Message Key 8
Function
Table of Contents
Troubleshooting
