Table of Contents
Model IFP-2000/ECS Installation Manual
microphone. The green LEDs next to the Select Keys will activate or deactivate.
11.2.5
Message Mode
In Message Mode, the user is able to press the ECS message Keys to choose a message and press the Select Keys
to activate or deactivate which output areas the message will be played. This will activate or deactivate the green
and red LEDs next to the ECS Message Keys and the red LEDs next to the Select Keys.
11.2.6
Custom ECS Event
Custom ECS events allows the user to generate an ECS event and speak a custom message using the microphone.
Once the user is done speaking the message, the tone and any associated strobes will continue to be active in the
output areas.
To generate a Custom ECS Event:
1.
Gain ECS Control using the ECS Control Key when there is not an ECS Event active.
2.
Activate the microphone.
3.
Choose desired output areas using the Select Keys.
4.
Speak custom message into microphone.
11.2.7
Passing ECS Control
Passing of ECS Control is allowed when two LOCs have the same priority. When it is possible to pass control, a
prompt (similar to ) will display in which the user can: request control from the LOC with ECS Control, enter an
access code with the ECS Super User profile option to override the other LOC, or wait for the lockout timer to
expire (if applicable).
Figure 11-2 Request ECS Control with Lockout Timer Active
ECS Control lockout is programmable from immediate to 12 hours in increments of one second. You are also
able to select never expire.
When passing ECS Control between two ECS Super Users, the user is not shown the prompt screen. Instead, a
request for ECS Control is automatically made. Additionally, the lockout timer does not apply for ECS Super
User.
When a request for ECS Control is made, the LOC with ECS Control will be shown a screen (similar to Figure
11-5
151430-L8
Table of Contents
Troubleshooting
