Suzuki GRAND VITARA 2005 Service Manual page 473
Hide thumbs
Also See for GRAND VITARA 2005:
- Owner's manual (1736 pages) ,
- Service manual (801 pages) ,
- Manual (35 pages)
Table of Contents
Clutch Cover, Clutch Disc and Flywheel Components
1. Input shaft bearing
2. Flywheel
3. Clutch disc
Clutch Cover, Clutch Disc and Flywheel
Removal and Installation
Removal
1) Dismount transmission assembly referring to
"Manual Transmission Assembly Dismounting and
Remounting: in Section 5B".
2) Hold flywheel stationary with special tool and remove
clutch cover bolts (1), clutch cover (2) and clutch
disc.
Special tool
(A): 09924–17811
3) Pull out input shaft bearing (1) by using special tools.
Special tool
(A): 09921–26020
(B): 09930–30104
4. Clutch cover
5. Clutch cover bolt
6. Flywheel bolt
S5JB0B5306009
4) Remove flywheel from crankshaft.
Installation
NOTE
Before installation, make sure that flywheel
surface and pressure plate surface have
been cleaned and dried thoroughly.
1) Install flywheel (1) to crankshaft and tighten new
bolts (2) to specification.
Special tool
(A): 09924–17811
IYSQ01530019-01
Tightening torque
Flywheel bolt (a): 65 N·m (6.5 kgf-m, 47.0 lb-ft)
: 20 N⋅m (2.0 kgf-m, 14.5 lb-ft)
: 65 N⋅m (6.5 kgf-m, 47.0 lb-ft)
: Do not reuse.
Clutch:
5C-5
S5JB0B5306008
I5JB0A530022-01
I2RH01530023-01
Chapters
Table of Contents
