Suzuki GRAND VITARA 2005 Service Manual page 316
Hide thumbs
Also See for GRAND VITARA 2005:
- Owner's manual (1736 pages) ,
- Service manual (801 pages) ,
- Manual (35 pages)
Table of Contents
3C-5 Transfer:
DTC No.
U1100
Lost communication with ECM
Lost communication with ABS /
U1121
ESP® control module
NOTE
"O" in transfer position indicator column of the above table means indicator lights up when DTC is
detected.
Scan Tool Data
Scan Tool Data
Vehicle speed
At vehicle stop
Engine speed
At engine idle speed
Transfer shifted to 4H position
Transfer being shifted between 4H-lock and 4H position
Transfer shifted to 4H-lock position
Actuator Pos Sen
Transfer being shifted between 4H and N position
Transfer shifted to 4L-lock position
Transfer being shifted between N and 4L-lock position
Transfer shifted to N position
Transfer shifted to 4H position
Transfer shifted to 4H-lock position
Actuator motor Pos
Transfer shifted to 4L-lock position
Transfer shifted to N position
Battery voltage
Ignition switch ON and engine stop
Transfer shifted to 4L-lock or N position
4L/N switch
Transfer shifted to 4H or 4H-lock position
Transfer shifted to 4H or N position
Center diff lock SW
Transfer shifted to 4H-lock or 4L-lock position
A/T shifted to "N" range
N range signal (AT)
A/T shifted to other than "N" range
Clutch pedal depressed
CPP switch (MT)
Clutch pedal released
Transfer switch selected to N position
Mode switch 1
Transfer switch selected to 4H, 4H-lock or 4L-lock position
Transfer switch selected to 4H, 4H-lock or N position
Mode switch 2
Transfer switch selected to 4L-lock position
Transfer switch selected to 4H-lock or 4L-lock position
Mode switch 3
Transfer switch selected to 4H or N position
Buzzer not being sound
Transfer shifted to N Position
Warning buzzer
Transfer shifted to disagreement of transfer switch and transfer
position
ABS operating
ABS active
ABS not operating
ESP® operating
ESP® active
ESP® not operating
Detecting item
Vehicle Condition
Detecting condition
(DTC will set when detecting)
Receiving error of 4WD control module from
ECM for specified time continuously.
Receiving error of 4WD control module from
ABS / ESP® control module for specified time
continuously.
Transfer
position
indicators
S5JB0B3304009
Normal Condition /
Reference Value
0 km/h, 0 mph
Engine idle speed is display
4H
4H-lock – 4H
4H-lock
4H – N
4L-lock
N – 4L-lock
N
4H
4H-lock
4L-lock
N
10 – 14 V
ON
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
ON
OFF
ON
OFF
OFF
N Pos
Error
ON
OFF
ON
OFF
Chapters
Table of Contents
