Table of Contents
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Selecting the hybrid cables
Identifying the hybrid cables
Tab. 5-22:
Hybrid cable outgoing directions
Fig. 5-35:
Example of drive system with hybrid cable
Each drive line has to be terminated with the terminal connector RHS0014.
All hybrid cables are suited for use in flexible cable tracks. In the example,
the cable RKH0700 is used in a flexible cable track. To quickly replace the
flexible cable track cable for servicing, the cable in the example used in the
flexible cable track has been equipped with connectors at the inputs.
Observe the maximum allowed length of the hybrid cable in the flexible cable
track (see
chapter "Length of hybrid cable incl. communication " on page
227).
Hybrid cables are labeled according to the following example:
RKH0111/030,5
The cable designation is made up of:
●
Cable number: e.g. RKH0111
●
Cable length: e.g. 30.5 m
Technical data of the components
Hybrid cable outgoing direction:
●
A: horizontal (towards the housing)
●
B: horizontal (away from the housing)
●
V: vertical
R911335703_Edition 04 Bosch Rexroth AG
119/407
Table of Contents
