Group E2: Multi-Speed And Simple Plc - Bosch Rexroth EFC 3600 Operating Instructions Manual
Frequency converter
Hide thumbs
Also See for Rexroth EFC 3600:
- Instruction manual (68 pages) ,
- Easy start manual (15 pages) ,
- Instruction manual (40 pages)
Table of Contents
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
8.8
Group E2: Multi-speed and Simple PLC
E2.00
Acceleration time 2
Setting range
0.1 ~ 6000.0s
Minimum unit
0.1s
Factory default
5.0s
E2.01
Deceleration time 2
See [E2.00] "Acceleration time 2"
E2.02
Acceleration time 3
See [E2.00] "Acceleration time 2"
E2.03
Deceleration time 3
See [E2.00] "Acceleration time 2"
E2.04
Acceleration time 4
See [E2.00] "Acceleration time 2"
E2.05
Deceleration time 4
See [E2.00] "Acceleration time 2"
E2.10
Multi-speed frequency 1
Setting range
0.00 ~ [b1.06]
Minimum unit
0.01 Hz
Factory default
0.00 Hz
E2.11
Multi-speed frequency 2
See parameter [E2.10] "Multi-speed frequency 1"
E2.12
Multi-speed frequency 3
See parameter [E2.10] "Multi-speed frequency 1"
E2.13
Multi-speed frequency 4
See parameter [E2.10] "Multi-speed frequency 1"
E2.14
Multi-speed frequency 5
See parameter [E2.10] "Multi-speed frequency 1"
E2.15
Multi-speed frequency 6
See parameter [E2.10] "Multi-speed frequency 1"
E2.16
Multi-speed frequency 7
See parameter [E2.10] "Multi-speed frequency 1"
Parameters [E2.10] ~ [E2.16] together with [b1.04] are used to set the frequencies in
multi-speed control and simple PLC.
● Multi-speed control
8 multiple speeds can be set via multi-speed control terminals, together with for‐
ward / reverse control terminal (FWD-CM and REV-CM) and acceleration / decelera‐
Bosch Rexroth AG
Parameter Settings
107/235
Hide quick links:
Table of Contents
