Bosch Rexroth EFC 3600 Easy Start Manual

Bosch Rexroth EFC 3600 Easy Start Manual

Hide thumbs Also See for Rexroth EFC 3600:

Quick Links

Easy Start Guide
(+)
Bosch Rexroth
EFC 3600 Frequency Inverter
available from Rexroth.InverterDrive.com
This guide is intended to compliment the user manual provided by the manufacturer.
It is provided as a basic introduction to the product for Inverter Drive Supermarket customers.
It should not be used as a replacement for the manual issued by the manufacturer.
This product is not a safety device. All safety considerations including but not
limited to Emergency Stop provision should be assessed separately and are
outside the scope of this guide.
Issue 2
20140924
Table of Contents
loading

Summary of Contents for Bosch Rexroth EFC 3600

  • Page 1 Easy Start Guide Bosch Rexroth EFC 3600 Frequency Inverter available from Rexroth.InverterDrive.com This guide is intended to compliment the user manual provided by the manufacturer. It is provided as a basic introduction to the product for Inverter Drive Supermarket customers.
  • Page 3: Table Of Contents

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter Contents Page 1 Contents Page 2 Power and Motor Connections (Single Phase) Page 3 Power and Motor Connections (Three Phase) Page 4 Motor Connections - Star and Delta Page 5 Parameters - Overview...
  • Page 4: Power And Motor Connections (Single Phase)

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 1. Power and Motor Connections (Single Phase) Before commencing, confirm that the Inverter and all cables are completely isolated from the power supply, have been isolated for at least 5 minutes and that the motor is not turning.
  • Page 5: Power And Motor Connections (Three Phase)

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 2. Power and Motor Connections (Three Phase) Before commencing, confirm that the Inverter and all cables are completely isolated from the power supply, have been isolated for at least 5 minutes and that the motor is not turning.
  • Page 6: Motor Connections - Star And Delta

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 3. Motor Connections - Star and Delta Dual voltage induction motors typically include The selection of Star or Delta is not optional terminal boxes with six points. The points can and must match the supply voltage.
  • Page 7: Parameters - Overview

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 4. Parameters - overview The Inverter contains a number of settings The parameters contain critical information which can be changed to tailor it for use in a essential to the correct operation of the wide range of applications.
  • Page 8: How To Set A Parameter Value

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 6. How to set a Parameter value 6.1 Find Parameter Groups. This example demonstrates the steps required to set parameter b1.05 which is Maximum Frequency. Press the “Func” key repeatedly until the display shows “-b0-”...
  • Page 9: How To Operate The Inverter From The Keypad

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 7. How to operate the Inverter from the keypad 7.1 Use the dial to set the required speed. The display will change to show the current speed reference in Hz. The minimum speed reference is defined by parameter b1.07 and the maximum reference by b1.06.
  • Page 10: How To Connect And Configure A Potentiometer For Remote Speed Control

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 8. How to connect and configure a Potentiometer for remote speed control If the integrated dial on the keypad is A Potentiometer of 10kOhm rating should be unsuitable for the application, a remote used.
  • Page 11: How To Connect And Configure A Run Forward Or

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 9. How to connect and configure a Run Forward or Run Reverse switch The parameters described in Section 5 enable This section explains how to enable 2-wire Run/Stop operation via the red and green control with Run Forward / Stop / Run Reverse buttons on the Inverter.
  • Page 12: How To Connect And Configure A Run/Stop Switch

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 10. How to connect and configure a Run/Stop switch with Forward/Reverse selection The parameters described in Section 5 enable This section explains how to enable 2-wire Run/Stop operation via the red and green control with Run/Stop and Forward/Reverse buttons on the Inverter.
  • Page 13: How To Configure "3-Wire" Control With Run/Stop

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 11. How to configure “3-Wire” control with Run/Stop pushbuttons and Forward/Reverse selection The parameters described in Section 5 enable This section explains how to enable 3-wire Run/Stop operation via the red and green control with Run and Stop commands via buttons on the Inverter.
  • Page 14: Brake Resistor Connection

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 12. Brake Resistor Connection Before commencing, confirm that the Inverter and all cables are completely isolated from the power supply, have been isolated for at least 5 minutes and that the motor is not turning.
  • Page 15: How To Reset The Inverter To Factory Defaults

    Easy Start Guide Bosch Rexroth EFC 3600 Series Inverter 13. How to reset the Inverter to Factory Defaults 13.1 Select the b0 Parameter Group With the motor stopped, press the “Func” button repeatedly until the display shows “-b0-” (do not press and hold the “Func”...

Table of Contents