Table of Contents
8
Commissioning
8.1
Initial commissioning
When carrying out any work in conjunction with commissioning of the Sytronix
system, observe the general safety instructions and intended use in chapter 2
"Safety instructions".
RE 62312-B, 03.2022
Working in the danger zone of a machine or system!
WARNUNG
Risk of severe injury due to unsafe working.
The machine or system may only be commissioned when
safe working is ensured.
−
Pay attention to and eliminate potential danger
sources
system.
−
Nobody may stand in the danger zone of the machine
or system.
−
The emergency stop button for the machine or
system must be within the operator's reach.
−
Always strictly observe the instructions of the
machine or system manufacturer during commis-
sioning.
Uncontrolled system behavior!
WARNING
Non-connected electrical and hydraulic connections can
cause malfunctions and hydraulic fluid jets to be ejected,
which can injure you.
−
Only commission a completely installed product.
Missing seals and plugs!
NOTICE
Loss of protection class! Liquids and foreign particles
may penetrate and damage the product.
−
Before commissioning, make sure that all seals and
plugs of plug-in connections are tight.
Ingress of dirt!
NOTICE
Damage to the Sytronix system! Contamination of the
hydraulic fluid results in wear and malfunction. Espe-
cially foreign bodies such as welding beads and metal
chips in the hydraulic lines can damage the Sytronix
system.
−
Observe utmost cleanliness during commissioning.
−
Make sure that no contaminants penetrate when
closing the measuring ports.
Insufficient hydraulic fluid!
NOTICE
Insufficient amounts of hydraulic fluid can lead to
destruction of the product.
−
Make sure that the housing of the Sytronix system
is filled with hydraulic fluid during commissioning
and in operation. This must also be observed during
longer periods of standstill, because the Sytronix
system may drain via the hydraulic lines.
Sytronix SvP 7030 IMC
Initial commissioning
before
commissioning
155 / 186
the
machine
or
Bosch Rexroth AG
Table of Contents
