Table of Contents
38/64
Commissioning
Bosch Rexroth AG, ROTATRAC eGFT 8000 general operating instructions series 10, RE 79088-01-B/02.2019
8 Commissioning
Dangers caused by work in the danger zone of a machine/vehicle!
Mortal danger, risk of injury or severe physical injury!
Be aware of potential hazards and eliminate such hazards before taking the
planetary gearbox into operation.
Nobody should be in the danger zone of the machine or the vehicle.
The "Emergency Stop" button for the machine/vehicle must be within reach of
the operator.
Necessarily observe the information provided by the machine or vehicle
manufacturer during commissioning.
Commissioning an incorrectly installed product!
Risk of injury and property damage! Improperly installed products may cause
injuries or damages to the product!
Make sure that all electrical or hydraulic connections are connected or sealed.
Only commission a completely installed product.
8.1 Initial commissioning
Before commissioning the planetary gearbox, following documents must be at hand:
• Dimensioned drawing of the planetary gearbox
• Technical data of the planetary gearbox
• Electric diagram of the electric motor on the planetary gearbox.
Only commission the planetary gearbox if it has been mounted and installed
according to the instructions and information in these operating instructions, the
material number-specific operating instructions and the operating instructions of
the overall machine or the vehicle.
For all work related commissioning of the planetary gearbox, observe the general
safety instructions and intended use as specified in chapter 2 "Safety
instructions".
WARNING
CAUTION
Table of Contents
