Table of Contents
General information concerning damage to property and product damages
3 General information concerning damage
to property and product damages
The following instructions apply to chapters 6 to 14.
Danger caused by improper handling!
The planetary gearbox can be damaged!
Do not submit the planetary gearbox to mechanical load in an unacceptable way.
Do not place any objects on the product.
Do not hit against sensitive mounting parts (e.g. sensors or valves).
Leave the protective covers on the gearbox until just before
connecting/installing the electric motor on the gearbox.
Damage of the planetary gearbox caused by a lack of knowledge when handling
the crane and the slinging equipment!
Lack of knowledge when handling a crane, or wrong slinging equipment, may lead
to uncontrolled movements of the planetary gearbox and therefore damage the
machine or vehicle!
Use a crane with sufficient lifting capacity for lifting the planetary gearbox.
Only use approved transport equipment.
Use e.g. eye bolts, straps, chains, swivel hooks, shackles or suitable equipment
as slinging equipment.
Damage caused by improper assembly!
Improper assembly may lead to damage of the planetary gearbox respectively the
machine or vehicle!
Make sure that the planetary gearbox has been properly mounted by qualified
personnel before operating it.
Damage to the planetary gearbox caused by improper installation!
Material damage to the planetary gearbox or its mounting parts!
Assign or close all necessary connections properly, particularly the one of the
static multiple-disk parking brake and the cooling oil circuit.
Only commission a completely installed product.
Take the required connections from the dimensioned drawing in appendix
D "Technical data / Drawings" of the material number-specific operating
instructions.
RE 79088-01-B/02.2019, ROTATRAC eGFT 8000 general operating instructions series 10, Bosch Rexroth AG
NOTE
15/64
Table of Contents
