Table of Contents
6 Transport and storage
Please read chapter 7.1 "Unpacking" before you transport the planetary gearbox.
6.1 Transporting the ROTATRAC eGFT 8000
Hazardous, uncontrolled movements during the transport of the planetary
gearbox!
Mortal danger, risk of injury, severe physical injury or damage to property!
Observe the national laws and regulations regarding occupational safety and
health protection and transport.
Weight information about the planetary gearbox can be found in the shipping
documents, the technical data sheet or on the name plate.
Make sure that the planetary gearbox is attached to the crane or the forklift
exclusively by qualified personnel with credentials, using attachment means, and
is transported only by said qualified personnel, with a crane or forklift. In
addition, observe chapter 2.4 "Qualification of Personnel".
Adjust the lifting means (crane or forklift) and attachment means (chains and
shackles or straps or ropes) to the weight and the dimensions of the planetary
gearbox.
Design the load-carrying capacity of the lifting means to match the weight of the
planetary gearbox.
Tighten the means of attachment before lifting the planetary gearbox.
You may only lift the planetary gearbox with a forklift if it is protected by a
transport frame / a pallet designed for the planetary gearbox.
Make sure that the crane loads (such as the planetary gearbox on the crane
hook) do not start swaying.
Danger from suspended loads!
Danger to life or risk of injury!
Use a crane or forklift whose load-carrying capacity is sufficient to lift the
planetary gearbox.
Never step or put your hands under suspended loads.
RE 79088-01-B/02.2019, ROTATRAC eGFT 8000 general operating instructions series 10, Bosch Rexroth AG
Transport and storage
WARNING
23/64
Table of Contents
