Table of Contents
3
General notes on damage to property and
damage to the product
The warranty only applies to the delivered configuration.
The warranty becomes void if the product is incorrectly mounted, commis-
sioned or operated, not used as intended and/or handled improperly.
RE 62312-B, 03.2022
Inadmissible mechanical load!
NOTICE
Impact or shock forces on the Sytronix system and
attached components may damage or even destroy it.
−
Do not hit on the drive shaft of the unit.
−
Never use the Sytronix system as a handle or step. Do
not place/put any objects on top of it.
Foreign particles and dirt in the Sytronix system!
NOTICE
Risk of damage, wear and malfunctions due to ingress of
dirt and foreign particles.
−
During installation, ensure utmost cleanliness in
order to prevent foreign particles such as welding
beads or metal chips from getting into the hydraulic
lines.
−
Before commissioning, make sure that all hydraulic
connections are tight and that all seals and
closing elements of plug-in connections are correctly
installed and not damaged.
−
When filling the system with hydraulic fluid, filter
the fluid with a suitable filtering system to minimize
contamination with solid particles and water in the
system.
−
Do not use cotton waste or linty cloths for cleaning.
−
Take care that no cleaning agents enter the hydraulic
system.
Wear!
NOTICE
Wear may lead to malfunctions.
−
Carry out the prescribed maintenance work at the
time intervals specified in the operating instructions.
Environmentally harmful hydraulic fluid!
NOTICE
Leaking hydraulic fluid leads to environmental pollution.
−
Immediately remedy any leakage.
−
Dispose of the hydraulic fluid in accordance with the
national regulations in your country.
Insufficient pressure!
NOTICE
If the pressure falls below the specified value, damage
can occur or the product be destroyed.
−
Make sure that the pressure cannot fall under the
prescribed minimum value.
Sytronix SvP 7030 IMC
Bosch Rexroth AG
19 / 186
Table of Contents
