GE
D
GB091046, R
IRECTION
8-11-3-2
BEP6 Hard Disk Drive (HDD) removal procedure
Follow these steps to remove the HDD:
1.) Disconnect the cables connecting the HDD.
2.) Remove the two screws that secures the HDD Bracket to the BEP's frame.
Figure 8-190 BEP6 HDD screws
3.) Get hold of the HDD assembly, see figure below, and pull it out.
Figure 8-191 Pull out the HDD assembly
2
EVISION
Chapter 8 - Replacement procedures
VIVID E9 / VIVID E7 BT'13 S
M
ERVICE
ANUAL
8 - 243