Table of Contents
GE
D
GB091046, R
IRECTION
6-7-3-2
XY Lock Adjustment for Lock and Brake Mechanism (cont'd)
•
If the Park Lock Nut (2) and the Park Lock Lever (3), are in the positions illustrated in
15, the lock will not engage.
(This occurred in some earlier systems. The nut and retainer did not return to the "charged" mode
after unlock.)
Figure 6-15 Park Lock Failure
•
By hand, rotate the Threaded Lead Screw on the actuator (4) counterclockwise until the Lock Nut
is barely touching the Bearing Housing (5).
The two small plastic springs should just touch, but do not deform.
Figure 6-16 Park Lock adjustment
•
Make sure the Park Lock Lever (3) is loose and can engage and hold the Lock Wheel, (6), in
locked position, as illustrated in
6 - 16
2
EVISION
Section 6-7 - Adjusting the XYZ Mechanism
VIVID E9 / VIVID E7 BT'13 S
3
Figure
6-16.
M
ERVICE
ANUAL
Figure 6-
- Quick Links:
- Configuration
Hide quick links:
Chapters
Table of Contents
Troubleshooting
