Table of Contents
GE
D
GB091046, R
IRECTION
8-6-31-2
Handle Left Top / Handle Right Top removal
Hatches are used to attach the Handle Left Top and Handle Right Top to the Lower UI.
NOTE:
Be careful when doing this procedure. It is easy to break the plastic hatches.
NOTE:
The screwdriver positions in
the hatches are located.
1.) Use a thin screwdriver to release the hatches, one by one as illustrated in
Hatches" on page
Figure 8-133 Release Hatches
1
4
2.) Remove the Handle Left Top or Handle Right Top.
3.) If needed, repeat the previous steps for the other handle.
8-6-31-3
Handle Left Top / Handle Right Top installation
1.) Remove the Gel Cups (if present).
2.) Install the Handle, Left Top / Handle, Right Top by pressing them into the UI Frame, Lower.
3.) Install the Gel Cups you removed in step 1.
4.) Install the Operator Panel, Lower.
5.) Install the Operator Panel Upper.
2
EVISION
Figure 8-133 "Release Hatches" on page 8-151
8-151, until you can remove the Handle Left Top or Handle Right Top.
2
5
Chapter 8 - Replacement procedures
VIVID E9 / VIVID E7 BT'13 S
indicates where
Figure 8-133 "Release
3
6
M
ERVICE
ANUAL
8 - 151
- Quick Links:
- Configuration
Hide quick links:
Chapters
Table of Contents
Troubleshooting
