Table of Contents
GE
D
GB091046, R
IRECTION
8-11-2-2
Remove BEP6 Power Board Assembly
Figure 8-187 BEP6 Power Board Assembly removal
Follow these steps to remove the BEP6 Power Board Assembly:
1.) Unplug the cable (plug) at the top of the BEP6 Power Board Assembly.
2.) Remove the two screws that secure the BEP6 Power Board Assembly.
3.) Slide the BEP6 Power Board Assembly out of the BEP. You will need to apply some force - use the
two brackets as handles. Refer the two small yellow rings in
Assembly removal
4.) To install the BEP6 Power Board Assembly, go to:
8-11-2-3 "Install the BEP6 Power Board Assembly" on page
2
EVISION
(above).
Chapter 8 - Replacement procedures
VIVID E9 / VIVID E7 BT'13 S
Figure 8-187 - BEP6 Power Board
8-238.
M
ERVICE
ANUAL
8 - 237
- Quick Links:
- Configuration
Hide quick links:
Chapters
Table of Contents
Troubleshooting
