Table of Contents
GE
D
GB091046, R
IRECTION
8-6-29
Probe Cable Hook Twin replacement
Figure 8-131 Cable Hook, Twin
CABLE HOOK, TWIN
8-6-29-1
Remove the Cable Hook, Twin
1.) Unscrew the fastening screw. (It has been locked with Lock-Tite, so you may need to apply a little
extra force to unscrew the screw.)
2.) Remove the Cable Hook, Twin.
8-6-29-2
Install the Cable Hook, Twin
1.) Position the Cable Hook, Twin as shown in
2.) Fix it in place by using an M5x20 screw with an M6 washer. Lock-Tite has to be used.
Torque: 50 Ncm (fingertight).
8 - 148
2
EVISION
Section 8-6 - Top Console Parts Replacement Overview
VIVID E9 / VIVID E7 BT'13 S
SCREW, M5X20 WITH M6 WASHER
Figure 8-131 "Cable Hook, Twin" on page
M
ERVICE
ANUAL
8-148.
- Quick Links:
- Configuration
Hide quick links:
Chapters
Table of Contents
Troubleshooting
