Table of Contents
Chapter 7 Troubleshooting
7.3 Troubleshooting
This section describes the actions to take for troubles that may
occur while you are using the scanner. Please check the
following items before you request a repair. If the problem
persists, check each item in
"7.4 Before You Contact the
Scanner Service Provider" (page
FUJITSU scanner dealer or an authorized FUJITSU scanner
service provider.
The following are some examples of troubles that you may
experience.
Symptoms
"Scanner cannot be powered ON." (page 71)
"Scanning does not start." (page 72)
"Image quality is poor." (page 73)
"Quality of scanned text or lines is unsatisfactory." (page 74)
"Images are distorted or not clear." (page 75)
"Vertical streaks appear on the scanned image." (page 76)
"The LED indicator on the operator panel is lit or flashing after the
scanner is turned on." (page 77)
"Multifeed error occurs frequently." (page 78)
"Situation in which the document is not fed into the ADF occurs
frequently." (page 80)
"Paper jams/pick errors occur frequently." (page 81)
"Scanned images turn out elongated." (page 82)
"A shadow appears at the top or the bottom of the scanned image."
(page 83)
85), and then contact your
Symptoms
"There are black traces on the document." (page 84)
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
70
Table of Contents
