Table of Contents
Chapter 3 How to Use the Operator Panel
Indications for the LED Indicator and the [Power]
Button
LED
[Power]
Indicator
Button
Off
Flashing
This combination indicates that the
initialization is in process after the scanner is
turned on.
This combination stays as it is from the time
that the scanner resumes from power saving
mode or the ADF is closed up until the time
that the scanner enters ready status.
Off
Lit
The scanner is in ready status.
Indicates that the initialization was
successfully completed after the scanner is
turned on.
This combination also occurs when the
scanner is in power saving mode.
Lit
Lit
Indicates that a temporary error occurred
during scanning.
For more details about the errors, refer to
"Temporary Errors" (page
Flashing
Lit
Indicates that a device error (alarm) occurred
or
during initialization or scanning.
Flashing
For more details about the errors, refer to
"Device Errors" (page
Description
68).
69).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
41
Table of Contents
