Operational - Fujitsu Libra S6 Operator's Manual

Image scanner
Table of Contents
Appendix
Item
Grayscale level
Interface
*1: Long page scanning supports documents with a length of up to 3,048 mm (120 in.) when the resolution is set to 200 dpi or less.
*2: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*3: The capacity varies depending on the paper weight.
For details, refer to
"2.3 Documents for Scanning" (page
*4: Use the USB cable that is supplied.
When connecting the USB cable to a USB hub, make sure you connect it to a USB hub that is connected to the USB port of a computer.
Connection with USB 2.0 requires the USB port and the hub to support USB 2.0. Also note that the scanning speed slows down when USB 1.1 is used.
Specification
ADF
256 gradation levels
USB 2.0/1.1 (*4)
34).
Flatbed
-
B Type
TOP
Contents
Notes
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
108
Table of Contents
loading

Table of Contents