Table of Contents
Chapter 8 Operational Settings
8.4 Settings Related to Sheet Counters
Checking and Resetting the Sheet Counters
■
Checking the Sheet Counters
The status on each consumable part can be viewed to
determine when to replace the consumables.
When a consumable needs to be replaced soon, the
background color of the counter for the consumable changes.
The background color of the counter turns light yellow or
yellow when the sheet count for each consumable reaches the
following.
Item
Background Color of the Counter
Light Yellow
Pad
28,500 to 29,999 sheets
Pick Roller
190,000 to 199,999 sheets
For details about replacement cycles, refer to
Consumables and Replacement Cycles" (page
1
Start up the Software Operation Panel.
For details, refer to
"8.1 Starting Up the Software Operation Panel"
(page
89).
2
From the listing on the left, select [Device Setting].
Yellow
30,000 sheets
or more
In this window, you can check the following items:
200,000 sheets
or more
Total Count (ADF)
"6.1
60).
Total Count (FD)
Pad
Pick Roller
Item
Description
Approximate total number of sheets
scanned through the ADF
Approximate total number of sheets
scanned with the flatbed
Number of sheets scanned after the pad
unit is replaced
The number of sheets is counted in
increments of 500.
Number of sheets scanned after the pick
roller unit is replaced
The number of sheets is counted in
increments of 500.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
101
Table of Contents
