Table of Contents
Chapter 6 Replacing the Consumables
6.3 Replacing the Pick Roller Unit
Replace the pick roller unit in following procedure.
1
Turn off the scanner and wait for at least 15 minutes.
For details, refer to
"1.3 Turning the Power ON/OFF" (page
2
Unplug the power cable.
3
Remove all documents from the ADF paper chute
(feeder).
4
Open the ADF cover.
For details, refer to
"1.4 Opening/Closing the ADF" (page
When the ADF cover is open, it might close
accidentally. Be careful not to get your
fingers caught.
5
Remove the pick roller unit.
1 Rotate the bushing until it clicks in the direction of the arrow.
Pick Roller
19).
Unit
Bushing
20).
2 Move it to the right while holding the busing, and remove it towards
you.
Bushing
2
1
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
63
Table of Contents
