Table of Contents
Chapter 7 Troubleshooting
7.1 Paper Jam
When your document is jammed inside the scanner, remove
the document in the following procedure:
Do not use force to pull out the jammed
document, and make sure to open the ADF
first.
Be careful not to touch any sharp parts upon
removing jammed documents.
Be careful not to get things such as hair, a tie
or necklaces caught inside the scanner.
The inside of the ADF may become extremely
hot during operation.
1
Remove all documents from the ADF paper chute
(feeder).
2
Open the ADF.
For details, refer to
"1.4 Opening/Closing the ADF" (page
When the ADF is open, it might close
accidentally. Be careful not to get your
fingers caught.
3
Remove the jammed document.
ATTENTION
Make sure to check the documents and the paper path
thoroughly. Remove any metal objects such as staples or paper
clips to prevent paper jams.
Be careful not to damage the glass surfaces and the guides
when removing documents with metal objects such as staples
20).
or paper clips.
4
Close the ADF.
For details, refer to
ATTENTION
Confirm that the ADF is closed properly. Otherwise, the
document may not be fed into the ADF.
Occasionally when scanning is complete or canceled,
documents may remain in the ADF without any error message
displayed. In that case, remove the documents by following the
above steps
"1.4 Opening/Closing the ADF" (page
Be careful not to get your fingers caught
when closing the ADF.
1
to 4.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
20).
Troubleshooting
Operational
Settings
Appendix
Glossary
66
Table of Contents
