Table of Contents
Chapter 6 Replacing the Consumables
6
Attach a new pad unit.
Place the pad unit in its original position and push the right and left
catches into slots.
Catches
To avoid injuries, be careful not to get your
fingers caught on the metal part that has
been exposed after the pad unit was
removed or the pick spring (metal part).
ATTENTION
Check that the pad unit is attached properly. Otherwise, it may
cause feeding errors such as paper jams.
7
Close the ADF cover.
For details, refer to
"1.4 Opening/Closing the ADF" (page
Be careful not to have your fingers caught
when the ADF cover closes.
8
Plug the power cable, and turn on the scanner.
For details, refer to
"1.3 Turning the Power ON/OFF" (page
9
Reset the sheet counter in the Software Operation Panel.
For details, refer to
"Resetting the Sheet Counters" (page
20).
19).
102).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
62
Table of Contents
