Table of Contents
Chapter 6 Replacing the Consumables
6.2 Replacing the Pad Unit
Replace the pad unit in the following procedure.
1
Turn off the scanner and wait for at least 15 minutes.
For details, refer to
"1.3 Turning the Power ON/OFF" (page
2
Unplug the power cable.
3
Remove all documents from the ADF paper chute
(feeder).
4
Open the ADF cover.
For details, refer to
"1.4 Opening/Closing the ADF" (page
When the ADF cover is open, it might close
accidentally. Be careful not to get your
fingers caught.
5
Remove the pad unit.
Squeeze both ends of the pad unit and pull it out in the direction of the
arrow.
Pad Unit
19).
20).
To avoid injuries, be careful not to get your
fingers caught on the metal part that has
been exposed after the pad unit was
removed or the pick spring (metal part).
Pick Springs
(Metal Part)
Metal Part
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
61
Table of Contents
