Table of Contents
2. Remove steering wheel cover
3. Remove steering wheel nut
wheel.
e
4. Remove three fasteners
coil assembly. Disconnect electrical harness.
5. Remove dash. See Dash Removal in the Body/Frame
chapter.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
q
.
w
and remove steering
and remove the steering
STEERING / SUSPENSION
r
6. Remove two fasteners
from the tilt bracket
assembly, and remove tilt bracket and pivot tube as
an assembly.
INSTALLATION
1. Reverse removal procedure for installation.
TORQUE
Tilt Bracket Mounting Fasteners:
33 ft-lbs (45 Nm)
Front Coil Assembly Fasteners:
27 in-lbs (3 Nm
Coil Assembly Side Fastener:
27 in-lbs (3 Nm
Steering Wheel Nut:
66 ft-lbs (90 Nm)
LOWER STEERING SHAFT
REPLACEMENT
REMOVAL
1. Park vehicle on a flat, level surface.
2. Remove steering wheel cover
9
q
.
9.5
Chapters
Table of Contents
Troubleshooting
