Table of Contents
UPPER CONTROL ARM REPLACEMENT
REMOVAL
1. Place vehicle on a suitable lift or jack and remove
front wheel.
2. Remove four front fascia fasteners
front fascia.
3. Remove ball joint pinch bolt
the upper control arm.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
q
and remove
w
, washer, and nut from
STEERING / SUSPENSION
4. Remove two control arm mounting fasteners
IMPORTANT
The access panel must be removed from the driver's
side footwell to remove rear upper control arm fastener.
To remove the rear upper control arm fastener from the
passenger side, turn the steering wheel counter-
clockwise to lock. Cover the tie rod boot with a rag or
lubricate the socket extension shaft to prevent damage
to the boot.
r
5. Drill out four rivets
retaining front brake line to the
control arm using a 3/16" drill bit.
6. Remove control arm from the vehicle.
INSTALLATION
1. Install control arm into its inner mounts, and ball joint
into the bearing carrier.
e
.
9
9.15
Chapters
Table of Contents
Troubleshooting
