Table of Contents
ENGINE / COOLING SYSTEM
9. Remove two push-pins
fascia.
10. Disconnect coolant hoses from the radiator.
11. Disconnect electrical connector from cooling fan
assembly.
12. Remove two fasteners
assembly.
13. Disconnect wire routing clips from the radiator
assembly. Note location of these clips for installation.
14. Remove radiator, cooling fan and radiator shroud as
an assembly.
15. Remove push-pins to separate radiator from fan and
shroud assemblies.
INSTALLATION
1. Install new radiator onto cooling fan and shroud, and
install assembly mounting push-pins.
2. Mount radiator assembly onto vehicle chassis and
install radiator hoses.
3. Route and install wiring harness onto radiator
assembly.
3.20
o
and remove the front
a
retaining the radiator
4. Install two fasteners to mount assembly. Torque
fasteners to specification.
TORQUE
Radiator Mounting Fasteners:
9 ft-lbs (12 Nm)
5. Connect cooling fan electrical connector.
6. Install front fascia and install two mounting push-pins.
7. Install headlight and accent light electrical
connectors.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
Chapters
Table of Contents
Troubleshooting
