Front / Rear Spring Preload Adjustment - Polaris RZR PRO R Service Manual

Table of Contents
MAINTENANCE
FRONT / REAR SPRING PRELOAD
ADJUSTMENT
The factory setting is appropriate for nearly all riding
conditions. If desired, the suspension may be adjusted to
maintain vehicle clearance height when carrying loads.
Adjusting the suspension may change vehicle handling.
IMPORTANT
The distance between the main preload ring (top ring)
and the cross-over rings (middle rings) should be
constant. If you move the main preload ring, you will
need to move the cross-over rings an equal amount.
The cross-over rings need to be locked tight after any
adjustment is made. To lock the cross-over rings, take a
punch and hammer to hit each side so the rings jam
together. If the cross-over rings are not locked down
tight, damage to the shock may occur.
To adjust the preload, do the following:
1. Elevate the vehicle to allow the suspension to fully
extend.
2. Turn the adjusting ring to the left to add preload. Turn
the adjusting ring to the right to remove preload.
Uneven adjustment may cause poor handling of the
vehicle. Always adjust both the left and right spring
preloads equally or have your POLARIS dealer or
qualified person perform the adjustments.
2.34
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
Table of Contents
loading

This manual is also suitable for:

Rzr pro r 4Rzr pro r 2022Rzr pro r 4 2022

Table of Contents