Table of Contents
INSTALLATION
Reset the timing chain tensioner by performing the
following steps:
1. Remove the piston assembly from the body of the
timing chain tensioner.
2. Press in and twist clock-wise the end of the tensioner
piston until it engages with itself and stays collapsed.
NOTICE
This procedure works best when the tensioner piston is
dry.
3. Reinstall the piston assembly into the body of the
tensioner.
4. Install the tensioner assembly into the crankcase.
5. Install chain tensioner assembly. Install chain
e
tensioner fasteners
and torque to specification.
TORQUE
Tensioner Fasteners:
80 in-lbs (9 N·m)
6. Press in and release the tensioner piston to allow it to
engage with the chain guide.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING SYSTEM
7. Install the gasket and tensioner cover. Install three
w
tensioner cover fasteners
specification.
TORQUE
Tensioner Cover Fasteners:
80 in-lbs (9 N·m)
and torque to
3
3.43
Chapters
Table of Contents
Troubleshooting
