Table of Contents
8.5.8.2 by.schulz suspension seat post
Only applies to ebikes with this equipment
Remove seat post from the frame.
2 Remove safety and protective cover.
3 Clean seat post on the inside and outside.
4 Examine seat post rack for scratches, cracks
and breaks.
Replaced damaged seat post as specified in
the parts list.
If the paint protection film is missing or has
worn away, affix a new paint protection film.
5 Lubricate screws in the parallel suspension.
6 Reinsert seat post as per height specifications
in the ebike pass. Check screws for correct
tightening torques.
Tightening torque G1
M8 seat clamping screw
M5 fixing grub screws
Tightening torque G2
M6 seat clamping screw
M5 fixing grub screws
7 Put on safety and protective cover.
8.5.8.3 Suntour suspension seat post
Only applies to ebikes with this equipment
1
Remove seat post from the frame.
2 Remove safety and protective cover.
3 Examine seat post rack for scratches, cracks
and breaks.
Replaced damaged seat post as specified in
the parts list.
If the paint protection film is missing or has
worn away, affix a new paint protection film.
4 Undo pre-tensioning adjuster and take out
steel spring.
5 Clean seat post on inside and outside.
6 Grease seat post on inside with SR SUNTOUR
no. 9170-001.
7 Lubricate pressure roller with bike chain oil.
20-24 Nm
3 Nm
Lubricate articulated joints in parallel
suspension with bike chain oil.
12-14 Nm
3 Nm
Figure 148: SR Suntour suspension seat post lubrication
points
8 Reinsert seat post as per height specifications
in the ebike pass.
9 Check screws for correct tightening torques.
Tightening torque
Seat clamping screw
M5 fixing grub screws
10 Put on safety and protective cover.
Maintenance
1
1
15-18 Nm
3 Nm
175
Chapters
Table of Contents
