Table of Contents
7.3.15 Brake
7.3.15.1 Brake lever
Carefully clean the brake levers with a damp,
soft cloth.
Brake rotor
7.3.16
Notice
Protect brake rotor against lubricants
and grease from hands.
1 Put on protective gloves.
2 Spray brake rotor with brake rotor
cleaning spray.
3 Wipe with a cloth.
7.3.17 Belt
Notice
Never use aggressive (acid-based) cleaners,
rust removers or degreasers when cleaning
the belt.
1 Dampen a cloth with soapy water. Place the
cloth on the belt.
2 Hold and apply slight pressure while slowly
turning the rear wheel, so the belt passes
through the cloth.
7.3.18 Chain
Notice
Never use aggressive (acid-based) cleaners,
rust removers or degreasers when cleaning
the chain.
Never use gun oil or rust remover spray.
Never use chain cleaning devices or chain
cleaning baths.
Have chain with all-round guard cleaned and
cared for during maintenance.
Place newspaper or paper towels underneath to
collect dirt.
1 Slightly dampen a brush with dish-washing
liquid. Brush both sides of the chain.
2 Dampen a cloth with soapy water. Place the
cloth on the chain.
3 Hold and apply slight pressure while slowly
turning the rear wheel, so the chain passes
through the cloth.
4 Wipe off oily, dirty chains thoroughly with a
cloth and degreaser.
5 Care for chain after cleaning (see
Section
7.4.16).
7.3.18.1 Chain with all-round chain guard
Notice
The chain guard must be removed before
cleaning. Contact specialist dealer.
Clean water hole on the chain guard lower
surface.
Care for chain after cleaning (see
Section
7.4.16.1).
Cleaning and servicing
140
Chapters
Table of Contents
