Table of Contents
6.5.18.9 Adjust on-board computer
Notice
Never use on-board computer, the display or
the display mount as a handle. If the on-board
computer, display or display mount are used to
lift the ebike, components can become
irreparably damaged.
4
6
5
7
8
9
10
Figure 110: Overview of BOSCH LED Remote control
panel
Symbol
Designation
1
Selected level of assistance indicator
2
ABS indicator (optional)
3
Battery level indicator (control panel)
4
Select button
5
On-Off button (control panel)
6
Ambient light sensor
>
7
Increase brightness button/
forward button
Table 40: Overview of control panel
3
2
1
12
11
About these operating instructions
Symbol
Designation
8
<
Decrease brightness button/
back button
9
+
Plus button/
light button
10 –
Minus button/
push assist button
11
Diagnosis connection (for maintenance pur-
poses only)
12
Mount
Table 40: Overview of control panel
You can use the select button (4) to perform the
following functions:
•
Open the Q U I C K M E N U while riding.
•
Open the S E T T I N G S M E NU on the ST A T U S
SCREEN while the bicycle is stationary.
•
Confirm values and accept information
notifications
•
Leave a dialogue.
You can use the forward button (7) and back
button (8) to access the different user interfaces
with information on ride values even when riding.
This means both hands remain on the handlebars
while you are cycling.
You can use the plus button (9) and the minus
button (10) to increase and decrease the level of
assistance. You can use the buttons to scroll up
and down a list (such as the S ET T I N G S menu).
Open start screen
Press On-Off button
The S T A R T S C R E E N is displayed.
Opening the screens
Press the forward button or back button.
A new screen is displayed.
Open Status screen
1 Open the S T A R T SC R E E N.
2 Press the Back button.
The S T A T US S C R E EN is displayed.
110
Chapters
Table of Contents
