7.5.3
Checking the lighting
1 Check the cable connections on the front and
rear lights for damage and corrosion and
ensure they are firmly in position.
If cable connections are damaged or corroded,
or are not firmly in positioned, take ebike out of
service. Contact specialist dealer.
2 Switch light on.
3 Check that the front and rear lights come on.
I
II
III
Figure 139: Light positioned too high (1), correctly (2) and too low (3)
6 Check the position of the light beam.
If the light is positioned too high or too low,
adjust riding light (see
Section
6.5.17).
If the front or rear lights do not come on, take
ebike out of service. Contact specialist
dealer.
4 Place ebike 15 feet from the wall.
5 Stand the ebike up straight. Hold the
handlebars straight with both hands. Do not
use the kickstand.
.
Cleaning and servicing
1
2
1
2
1
2
154