Table of Contents
Shifting Gears
6.20
The selection of the appropriate gear is a
prerequisite for a physically comfortable ride and
making sure that the electric drive system
functions properly. The ideal pedaling frequency
is between 70 and 80 revolutions per minute.
Stop pedalling briefly when changing gears.
This makes it easier to switch gears and
reduces wear on the drivetrain. However, keep
the crank moving while switching gears.
6.20.1 Using the derailleur gears
Only applies to ebikes with this equipment
The speed and range can be increased while
applying the same force if you select the right
gear.
Stop pedaling briefly when changing gears. This
makes it easier to switch gears and reduces wear
on the drivetrain. However, keep the crank
moving while switching gears.
Figure 127: Switching gears with lever A, using shifter
SL-M315 as an example
2
1
Lever A switches from a smaller gear to a larger
one. The number of gears switched depends on
the selected position of lever A.
Place shifter A in position 1.
System shifts one gear higher.
Place shifter A in position 2.
System shifts two gears higher.
Figure 128: Switching gears with lever B, using shifter
SL-M315 as an example
Lever B switches from a larger lgear to a smaller
one.
Place shifter B in position 1.
System shifts one gear lower.
Switching gears
Select the appropriate gear with the shifter
unit.
The shifter switches the gear.
The shifter returns to its original position.
Clean and lubricate the rear derailleur if gear
changes struggle.
Operation
1
126
Chapters
Table of Contents
