Table of Contents
7.1.10 Checking the bell
1 Press the bell button downwards.
2 Let button spring back.
If you do not hear a clear, distinct ring of the
bell, replace bell. Contact specialist dealer.
7.1.11 Checking the hand grips
Check the hand grips are firmly in place.
Screw loose hand grips firmly into place.
7.1.12 Checking the USB cover
If featured, check the position of the cover on
the USB port on a regular basis and adjust if
necessary.
7.1.13 Checking the lighting
1 Switch light on.
2 Check that the front and rear lights come on.
If the front and rear lights do not come on, take
ebike out of service. Contact specialist dealer.
7.1.14 Checking the brake
1 Pull both brake levers when stationary.
2 Push the pedals.
If no resistance is generated in the usual brake
lever position, take ebike out of service.
Contact specialist dealer.
If the brake is losing fluid, take ebike out of
service. Contact specialist dealer.
Cleaning and servicing
135
Chapters
Table of Contents
