Dimensioned Drawings, Drilling Dimensions For The Pm250 Power Module - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage inverters
built-in units with cu250s-2 control units and
encoder evaluation
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
4.3.4
Dimensioned drawings, drilling dimensions for the PM250 Power Module
The following dimension drawings and drilling patterns are not to scale.
Frame size FSC
Table 4-11
Frame
size
FSC
BOP-2, IOP-2 or blanking cover
1)
Table 4-12
Frame
size
FSC
You can mount the Power Modules without any lateral cooling air clearance. For tolerance reasons,
1)
we recommend a lateral clearance of approx. 1 mm.
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Dimensions depend on the operator panel (OP) that is inserted
Mounting depth in the cabinet with Control Unit (CU) [mm]
without OP
227
Cooling air clearances and fastening
Cooling air clearances [mm]
Top
Bottom
125
125
4.3 Installing Power Modules
Fixing/torque [Nm]
1)
Front
65
Installing
with OP
1)
238
4 x M5 / 3
69
Table of Contents
