Motors And Multi-Motor Drives That Can Be Operated - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage inverters
built-in units with cu250s-2 control units and
encoder evaluation
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
3.6
Motors and multi-motor drives that can be operated
Siemens motors that can be operated
You can connect standard induction motors to the inverter.
You can find information on further motors on the Internet:
100426622)
Third-party motors that can be operated
You can operate standard asynchronous motors from other manufacturers with the inverter:
NOTICE
Insulation failure due to unsuitable third-party motor
A higher load occurs on the motor insulation in inverter mode than with line operation. Damage
to the motor winding may occur as a result.
● Please observed the notes in the System Manual "Requirements for third-party motors"
Further information is provided on the Internet:
view/79690594)
Multi-motor operation
Multi-motor operation involves simultaneously operating several motors from one inverter. For
standard induction motors, multi-motor operation is generally permissible.
Additional preconditions and restrictions relating to multi-motor operation are available on the
Internet:
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Motors that can be operated
Requirements for third-party motors
Multi-motor drive (http://support.automation.siemens.com/WW/view/en/84049346)
3.6 Motors and multi-motor drives that can be operated
(https://support.industry.siemens.com/cs/ww/en/view/
(https://support.industry.siemens.com/cs/ww/en/
Description
51
Table of Contents
